Serving the Allentown area  ·  (610) 600-9879  ·  Open Mon-Sun 7am-7pm
📞 (610) 600-9879 Free Quote

Metal Roofing in Allentown, PA (18101) · Local Professionals

Allentown Metal Roofing · Fast response in Allentown and the Allentown area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+282Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Allentown's housing stock tells its own story: 1870s brick rowhouses in Old Allentown, slate mansards in the Old Fairgrounds, and West End Victorians with steep pitches that shed snow fast but punish aging flashing. We replace failing slate and worn asphalt with metal that matches the neighborhood's character and handles Lehigh Valley freeze-thaw without the constant patching.

Homeowners from 18101 to the West End call us because we know how nor'easters and ice dams treat these roofs, and we show up with a free inspection, a clear scope, and crews that are fully insured (general liability and workers' compensation).

Metal Roofing in Allentown (18101)

Allentown sits where the Lehigh River cuts between South Mountain and Blue Mountain, and that terrain drives the work. Old Allentown rowhouses have tight lots and shared walls, so staging and tear-off need planning before the dumpster shows up. West End Victorians and suburban colonials sit on tree-lined streets where oaks and maples drop limbs and fill gutters, and those same trees shade roofs enough that freeze-thaw cycles linger at the eaves. Out toward Whitehall, Salisbury, and Lower Macungie, post-war ranches and two-story colonials often have shallow roof pitches and layered shingles that limit what a retrofit can do. We check existing layers before we quote a metal roof over shingles, because code caps how many layers you can recover. Historic district and HOA design review can also restrict panel profile and color, so we talk through that early. Our crews handle standing seam and copper and specialty metal, and we match slate-look panels to the old slate roofs across the Slate Belt when a homeowner wants the look without the maintenance.

We have been working Allentown and the surrounding Lehigh Valley long enough to know which blocks flood at the gutter, which streets get wind peel after a storm, and where ice damming is a yearly fight.

Our services in Allentown

How a Job Works in Allentown

Step 1: you call (610) 600-9879 or request a free estimate. We schedule an on-site assessment, check the roof deck, flashing, and fasteners, and talk through what you actually need, whether that is a repair, a coating, or a full replacement. You get a written scope and a price before anything starts.

Step 2: we pull the permit through the local building department and coordinate any historic or HOA review. On tight rowhouse blocks in Old Allentown we plan material delivery and dumpster placement so we are not blocking neighbors. Tear-off, deck repair, and installation follow the scope, and we keep you posted on weather delays because nor'easters and summer thunderstorms can shift the schedule.

Step 3: cleanup and final walkthrough. We magnet-sweep for nails, haul away debris, and walk the roof and gutters with you. We leave your property clean and show you what to watch for between inspections.

Pricing in Allentown depends on roof size, access, existing layers, and how much deck repair is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper and specialty metal at $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, flashing and chimney and skylight repair at $600, and gutters for metal roofs at $9 per linear foot. Snow guards and ice protection start at $1,200. Storm and wind damage inspections are free, and so are metal roof inspections and commercial and agricultural estimates. Call (610) 600-9879 for a free estimate on your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Allentown and nearby areas.

My Old Allentown rowhouse has a slate mansard that is failing. Can metal match that look without the weight?
Yes. We install stone-coated steel and metal shingle panels that mimic slate profiles, and they weigh far less than the original slate, which matters on older rowhouse framing. We check the deck and cornice details first, then match a profile that fits the block and clears historic review if your property is in a design review area.
A nor'easter peeled panels off my roof in the West End. How fast can you respond?
Call (610) 600-9879 and we will schedule a free storm and wind damage inspection. We document the damage for your insurance claim, tarp or secure what is open if needed, and give you a written repair scope. Response time depends on how many calls are active after the storm, so call as soon as it is safe.
What does a metal roof cost for a typical colonial in Lower Macungie?
Most two-story colonials land in a range driven by square footage, roof complexity, and whether we tear off or retrofit. Installation starts at $8 per square foot, standing seam at $10, and retrofit over shingles at $7, but valleys, dormers, and chimney flashing add labor. We give you a firm number after the free inspection.
Do I need a permit for a metal roof replacement in Allentown, and how do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspections vary by jurisdiction. We pull the permit for you and confirm the requirements with the local building department. You can also review the City of Allentown website at https://www.allentownpa.gov for general information before we start.
My neighbor and I share a roofline in a twin. Who handles the property line and HOA approval?
On twins and rowhouses we confirm the property line and party wall details before work starts, and we coordinate access so your neighbor is not surprised. If your block has an HOA or historic design review, we help prepare the panel profile and color submittal so approval does not stall the job.
Are you insured for work on my property?
Yes. We carry general liability and workers' compensation coverage, and our crews are fully insured. We can provide a certificate of insurance before work begins so you have it for your records.
What maintenance does a metal roof need in Allentown's freeze-thaw winters?
Keep gutters and downspouts clear so ice dams do not back up at the eaves, and have fasteners and sealant checked every few years, especially after a winter with heavy ice. Snow guards help on steep pitches where snow slides onto walks and entries. A free inspection in fall catches loose fasteners and flashing gaps before the first freeze.
Why choose us?

Trusted professionals in Allentown

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Allentown

All your work handled by qualified professionals in Allentown

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

282+ Verified Client Reviews in Allentown

⭐⭐⭐⭐⭐ 4.9/5 · 282 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Allentown · Response within 24h · No commitment · ☎ (610) 600-9879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Allentown ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm