Serving the Allentown area  ·  (610) 600-9879  ·  Open Mon-Sun 7am-7pm
📞 (610) 600-9879 Free Quote

Metal Roofing in Whitehall, PA (18052) · Local Professionals

Allentown Metal Roofing · Fast response in Whitehall and the Allentown area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+282Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Whitehall is post-war brick ranch territory, and if you live off MacArthur Road or near the Lehigh Valley Mall, your roof has probably been shingled two or three times since the 1950s. Those low-slope ranches and twins along Cementon and Stiles are exactly where we spend most of our spring and fall.

Homeowners in 18052 call Allentown Metal Roofing because we know how Whitehall roofs actually fail: not from wind alone, but from ice dams at the eaves and snow that lets go all at once onto the steps and the car below. We are a Metal Roofing Alliance member, fully insured, and we handle everything from a screw-and-flashing repair to a full standing seam replacement.

Metal Roofing in Whitehall (18052)

Most Whitehall lots are wide and flat, which sounds easy until you try to stage panels on a ranch with a driveway that slopes toward the house and a mature maple hanging over the ridge. The brick ranches here often have shallow roof pitches and original skip sheathing, so a retrofit over shingles needs a careful look at the deck before we ever quote it. Down in Cementon and along the Coplay Creek side, grade and drainage matter as much as the roof itself, because a fast snow slide off a metal panel can dump right onto a walkway or a lower porch roof. We plan snow guards and gutter sizing around that, not after the fact.

Our team has worked on slate-look metal across the Slate Belt and on stone farmhouses out toward Egypt and North Whitehall, so we are comfortable matching a profile to an older building instead of forcing a modern panel onto it. If you are in the older grid near the Whitehall Parkway or the Hokendauqua area, we will walk the property and tell you honestly whether a retrofit makes sense or whether a tear-off is the better call.

Our services in Whitehall

How a Job Works in Whitehall

Step 1: you call (610) 600-9879 and we set a free on-site assessment. We get on the roof, check the deck, flashings, and chimney, and look at how snow and water actually leave your property. You get a written estimate with the panel profile, gauge, and fastening method spelled out.

Step 2: we pull the permit through the local building department and schedule around the weather. On tight Whitehall streets near the schools, we plan panel delivery so a truck is not blocking the block at dismissal time. If you are in an HOA or a historic overlay, we coordinate the color and profile approval before we order material.

Step 3: cleanup and a final walkthrough. Magnets run over the lawn and driveway, gutters cleared of offcuts, and we walk the roof line with you so you know exactly what was done and what to watch for.

Pricing in Whitehall depends on roof size, pitch, deck condition, and how much tear-off is involved. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) from $7, standard metal roof installation from $8, standing seam from $10, and copper or specialty metal from $20. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run from $9 per linear foot. Storm and wind damage inspections are free. Call (610) 600-9879 for a real number on your Whitehall property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Whitehall and nearby areas.

My Whitehall ranch has two layers of shingles already. Can you still do a metal roof over shingles?
Sometimes, but code limits how many existing layers you can recover, and the deck has to be sound. We check the sheathing and the local building department rules before we commit. If the layers are too many or the deck is soft, we recommend a tear-off and quote it honestly.
A storm peeled back panels on my roof near MacArthur Road. How fast can you get out?
We treat wind-lifted and peeled panels as a priority because the next rain goes straight into the attic. Call (610) 600-9879 and we will schedule an inspection, often same or next day for active leaks. We document the damage for your insurance file, though coverage decisions are always up to your carrier.
What does a typical metal roof cost for a brick ranch in 18052?
Most Whitehall ranches land in the $8 to $12 per square foot range for installation, depending on panel type, pitch, and whether we tear off. A retrofit over shingles can start lower, around $7. Standing seam runs higher. We give you a written estimate after seeing the roof, not a phone guess.
Do I need a permit for a metal roof in Whitehall?
A full replacement or re-roof commonly requires a permit, and thresholds and inspection requirements vary. We always confirm with the local building department before work starts, and you can check the City of Whitehall website at https://www.lehighcounty.org for general municipal information. We handle the paperwork so you are not chasing it.
My neighbor's tree hangs over my roof line. What do I do before installation?
Property line and overhang issues are common on Whitehall's older lots. We flag branches that will rub or drop debris on the new roof, and you handle the trimming with your neighbor or the borough as needed. If you are in an HOA, we also help coordinate the design approval so the panel profile and color pass review.
Are you insured for work on my Whitehall property?
Yes. We carry general liability and workers' compensation coverage, and we are happy to provide proof before we start. That protects you if anything goes wrong on the job, and it is part of why we can work confidently on steep or awkward roofs.
What maintenance does a metal roof need in Whitehall's winters?
Ice dams and snow slides are the big ones here. We recommend checking fasteners and sealant every few years, keeping gutters clear before freeze-thaw season, and adding snow guards above walkways and steps. A quick annual inspection in late fall catches small flashing issues before they become leaks.
Why choose us?

Trusted professionals in Allentown

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Allentown

All your work handled by qualified professionals in Allentown

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

282+ Verified Client Reviews in Allentown

⭐⭐⭐⭐⭐ 4.9/5 · 282 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Allentown · Response within 24h · No commitment · ☎ (610) 600-9879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Allentown ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm