Serving the Allentown area  ·  (610) 600-9879  ·  Open Mon-Sun 7am-7pm
📞 (610) 600-9879 Free Quote

Metal Roofing in Macungie, PA (18062) · Local Professionals

Allentown Metal Roofing · Fast response in Macungie and the Allentown area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+282Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Macungie still feels like a small town even as the new colonials fill in around it. The borough and the surrounding townships mix 1990s to 2020s two-story homes with older stone farmhouses and Pennsylvania German bank barns, and most of those newer roofs sit on steep pitches where shingles take a beating from freeze-thaw cycles.

Homeowners in 18062 call Allentown Metal Roofing because we know what Macungie weather does to a roof. Between the nor'easters that funnel up the Lehigh Valley, ice dams at the eaves on colder nights, and summer thunderstorms that rattle the oaks and maples along Route 100, we see the same failures repeat: cracked shingle mats, loosened fasteners, and flashing gaps that open up after a hard freeze.

Metal Roofing in Macungie (18062)

Macungie sits in the Lehigh Valley between South Mountain and Blue Mountain, and that geography drives the work. The freeze-thaw cycle here is the real enemy. Water gets into a shingle mat or a fastener hole during a mild afternoon, freezes solid that night, and pushes the material apart a little more each time. On the steep roofs common in Macungie's newer subdivisions, that shows up as lifted shingle tabs and backed-out screws within a decade. On the older stone farmhouses and bank barns out toward the township edges, it shows up as failed flashing at chimneys and valleys where the original detail was never meant to last this long. Tree cover matters too: the oaks, maples, and sycamores drop limbs and fill gutters, and a clogged gutter in January is how ice dams start at the eaves.

We have installed and repaired metal roofing across Macungie and the Allentown area long enough to know which panel profiles suit a steep colonial versus a low-slope porch, and where a retrofit over existing shingles makes sense versus a full tear-off. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and our crews handle standing seam and snow guards as routine work, not specialties we farm out.

Our services in Macungie

How a Job Works in Macungie

Step 1: You call (610) 600-9879 or request a free estimate, and we schedule an on-site assessment. We walk the roof, check the deck and flashing, look at how the gutters are handling runoff, and talk through what you actually need. You get a written scope and a clear price before anything starts.

Step 2: We handle the work itself, including the details that matter in Macungie. That means coordinating with the local building department on permits, working around HOA design review if your subdivision has one, and planning material staging on tighter borough lots where a dumpster cannot sit in the street for a week. If your home is in a historic district, we confirm the approved panel profile and color before ordering.

Step 3: Cleanup and final walkthrough. We magnet-sweep for fasteners, haul away old material, and walk the finished roof with you so you can see the seams, flashing, and snow guards yourself. We do not consider the job done until you have looked it over and signed off.

Pricing in Macungie depends on roof size, pitch, access, and the condition of the deck underneath. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel runs about $5.50, while stone-coated steel and metal shingles start around $9. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs run about $9 per linear foot. Steep pitches, multiple roof planes, and tight lot access add labor, and storm damage work is priced after a free inspection. Call (610) 600-9879 for a free estimate on your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Macungie and nearby areas.

My 1990s colonial in the Brookside area has shingles lifting at the ridge after last winter. Is that a freeze-thaw problem or a ventilation problem?
Often it is both. Ridge lifting on Macungie roofs is usually the freeze-thaw cycle working on a shingle mat that is already aging, made worse by warm attic air escaping at the ridge. We check ventilation and deck condition during the free inspection before recommending a repair or a metal replacement.
A storm just peeled panels back on my roof near Route 100. How fast can you get out to Macungie?
Call (610) 600-9879 and we will schedule a free storm damage inspection as quickly as we can, usually within a day or two depending on call volume after a nor'easter. We document the damage for your insurance claim, tarp or secure what is open, and give you a written repair scope.
What does a typical standing seam roof cost on a two-story colonial in 18062?
Standing seam starts at $10 per square foot, so a typical two-story colonial in Macungie often lands in the mid five figures once you account for pitch, valleys, and any deck repair. Square footage, roof complexity, and whether we tear off or retrofit are the biggest cost drivers. We give you an exact number after the on-site estimate.
Do I need a permit to replace my roof in Macungie, and who handles it?
A full replacement or re-roof generally requires a permit, and the rules vary by jurisdiction, so it is worth checking with the local building department early. You can start with the City of Macungie website at https://www.lehighcounty.org to find the right office, and we coordinate the permit and inspections as part of the job.
My neighbor and I share a property line and my new metal roof will drain toward their yard. What do I do?
We look at the property line and drainage during the estimate and route gutters and downspouts so runoff stays on your side where possible. If your subdivision has an HOA, we also confirm the panel profile and color with the architectural review before ordering, and we document the existing line so there are no surprises later.
Is your crew covered by insurance if someone gets hurt on my Macungie property?
Yes. We carry general liability and workers' compensation coverage, and we can provide a certificate of insurance before work begins. That protects you as the homeowner if anyone is injured or property is damaged during the project.
What maintenance does a metal roof need in Macungie before winter?
Clear the gutters and downspouts in late fall so ice dams do not form at the eaves, check that snow guards are secure, and look for backed-out screws or lifted flashing after a hard freeze. A quick inspection in October catches the small issues before the nor'easters arrive. Call (610) 600-9879 to schedule a free estimate if you want us to take a look.
Why choose us?

Trusted professionals in Allentown

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Allentown

All your work handled by qualified professionals in Allentown

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

282+ Verified Client Reviews in Allentown

⭐⭐⭐⭐⭐ 4.9/5 · 282 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Allentown · Response within 24h · No commitment · ☎ (610) 600-9879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Allentown ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm